Why should the length of power cable be reserved?

It is very difficult to repair and replace600V 90°C XLPE ACWU90 AC90 Cable, especially when the middle section is in trouble, because the cable is laid in the open, the bridge, the buried, the cable trench and the pipe. So in the cable laying is required to reserve. Not only in the cable trench in the feeder, but also to reserve the end; if it is tube or cable trench laying, in the middle of the maintenance wells to reserve a certain length.

Advantages: When the power cable is connected to the feeder circuit or equipment, the copper nose needs to be pressed and the outer protective layer of the cable needs to be removed And the distribution cabinet, control cabinet itself is also relatively easy to affect the cable, so the cable in both ends need to reserve a certain length to deal with the subsequent maintenance.

Otherwise, it will be difficult to deal with the problem in the figure below. The advantage of the reserved maintenance well: When the power cable is laid secretly, a maintenance well must be set up at a certain distance, which is mainly used to deal with the inspection and repair of the fault in the middle part ofPVC XLPE Insulated Power Cable 25mm² ~ 400mm². If a section is damaged by external forces or problems, the amount reserved in the manhole can be used nearby, making maintenance convenient and time-saving. Otherwise, it is very difficult to deal with the following problem.

Other benefits: due to the general cable laying path is generally more complex, often need to turn bend, calculation of cable length can not be accurate, appropriate length can also be reserved for laying a variety of special circumstances.