AAAC Cable label is an identification mark used in field installation and after maintenance.
The purpose of cable identification is
Ensure the organization and correctness of installation
And the convenience of maintenance and inspection later.
This paper is to share the purpose, characteristics and how to choose cable label for you.
Application and characteristics of cable identification
In a line system, it is impossible for the operation and maintenance personnel to memorize a wide range of equipment and lines. In order to make sure that they do not miss in the inspection, it is necessary to manage the line identification. After marking each line, it shall be sorted and summarized and posted in a conspicuous position. In the future, it can be done without omission if the inspection is carried out in strict accordance with the project requirements.
Cable identification system can not only provide correct guarantee for the operation and maintenance personnel to carry out correct daily maintenance and abnormal accident handling, but also provide help for the later generations. Even if the new personnel are employed, as long as the identification is followed, there will be no misoperation.
How to select ACSR Cable label
Mark before or after the terminal is completed
Cable identification card: 1. It can be used before or after the terminal connection. 2. The content is clear. The label is completely wrapped around the cable.
Heat shrinkable cable identification pipe: 1. It can only be used before the terminal is connected, and is sheathed on the wire through the open end of the wire. 2. Before heat shrinking or splicing, the label can be replaced randomly. 3. After the terminal is jacketed, the sleeve will become a permanent mark which can withstand the bad environment. And it’s low cost.
What is the diameter of the cable
The diameter of the cable determines the type, length, or diameter of the sleeve to be identified. Cable identification card is widely used in large square cable, large logarithmic cable and outdoor optical cable. The heat shrinkable label tube is widely used on the small square secondary small line. Identification cards can be used for various cables of different diameters.
What environment will cable labels be placed in
Factors to consider include:
1. Is there any contact with oil, water, chemicals or solvents?
2. Is flame retardant required?
3. Does the state have any special or other provisions on this?
4. Is it used in clean or other environments? Even in the harsh environment, the heat transfer printing, industrial grade printing quality, has strong anti pollution, in fact, the print content is also “anti oil pollution”.
Do you plan to print or buy pre processed logo yourself?
Purchase cable identification
1. There are a variety of preprint content available for selection;
2. If the demand is large, it can provide customized preprint content;
3. There are various kinds of marks such as card and sleeve type, which can be selected, convenient to use and convenient for transportation;
4. It is suitable for various applications.
Print logo by yourself
1. Print various content as needed (even if you print very little);
2. There are various label and label sleeve materials for portable printer, heat transfer printer and computer printer;
3. Suitable for printing longer characters;
4. And have the label size suitable for different applications.
For more information on cables, click Joy ’cable Blog