Everyone knows that everything will deteriorate after being used for a long time, and the same goes for wires. WhenAerial Bundled Cable (ABC) HD 626 S1 Standard is aging for household or commercial use, it is easy to cause danger if it continues to be used, and timely inspection can eliminate potential safety hazards. But how to detect wire aging in time requires some tricks.
The wire is mainly insulated by the outer layer of sheath. After a long time, it will be corroded by corrosive gas, and the insulation performance will gradually decrease. It will gradually age and become hard, become brittle or fall off, and then it will not be insulated. In fact, the direct cause of the aging failure of the wire and cable is the breakdown of the insulation due to the degradation.
1. “Check the appearance along the wire, darkening and hard cracks are seen. Bending the wire with both hands for insulation, stiff and cracked skin.” It means to observe the insulation layer along the wire. If the color of the insulation layer is found to be tarnished, darkened, or changed Hard, cracked, and partially peeled off.
When the insulated conductor is bent with both hands, the wire is stiff, even the insulation layer is cracked, the insulation layer falls off, etc., which shows that the wire has experienced different degrees of aging and severe aging.
2. “Accurate method to measure insulation, megohm is not low. The humidity value in rainy days can be small, and the value can be less than half.” It means that the insulation resistance meter can be used to measure the insulation of electrical circuits to determine the insulation status of the circuit more accurately.
3. If the wires cannot be replaced in time, you can also choose to use good internal materials to reduce hidden dangers. Once the insulation of the sheath of the wire casing is damaged, the possibility of fire will increase. The length of time for causing a disaster has a lot to do with the quality of the oxygen barrier. The newly produced diamond mud ceramic silica gel with silicone rubber as the base material by Shanghai Tengruina Chemical Technology Co., Ltd. has good high temperature resistance, fire resistance and fire resistance. The effective prevention and control of fire sources is to prevent fires to a certain extent. avoid lost. If there is a fire around the line, the shell of diamond mud ceramic silicon rubber can also ensure that it will not melt or drip in the flame, which effectively protects the normal use of the line and avoids explosions.
Finally, the editor still has a small reminder: the wire is aging, and the wire needs to be replaced in time. Don’t have a fluke mentality. The diamond mud oxygen barrier can only reduce the possibility of fire. Once a fire occurs, it will affect manpower, material resources and financial resources. The losses should not be underestimated!